Aidite Biomic Stain & Glaze Aesthetic Kit

All in one

A Stain/Glaze suitable for all types of ceramic restorations, like zirconia, glass ceramic, porcelain, etc., Universal coloration system for all restorations.

Simple to use

The coloration pastes of the Biomic Stain/Glaze are simple and user friendly. With the recommended schematics from Aidite, technicians can utilize the simple system to achieve ideal aesthetic results.

Bionic aesthetics

The composition of 2D paste color in Biomic Stain/Glaze completely mimics the colors of natural teeth, the 3D paste combination then creates the aesthetic effects. At the same time, 3D pastes can be used to adjust the tooth surface morphology, and slight contour distinctions.

Processing Tips

Low-temperature powder can be mixed into Glaze-F to form a special paste. If it is too thick, it can be mixed with coloring liquid 1. If you want to make a special color 3D paste, just mix the powder with 3D Natural, and add the coloring liquid 2 to adjust the consistency as needed for easy operation. All the surfaces of all-ceramic crowns can be adjusted with 3D paste. The 3D pastes contain porcelain powder, which will increase the thickness after sintering, and can be used to increase the occlusal contact area, abutment surface and incisal length. When micro-cutting the full crown, 3D paste can be directly used after dyeing to achieve the same effect as porcelain. To reduce the surface brightness of the restoration after sintering, the sintering temperature can be reduced to 715 ℃. To improve the surface brightness of the restoration after sintering, the sintering temperature can be increased to 750 ℃. You can increase or decrease the surface brightness of the restoration by manual polishing after glazing.

2D paste：Shade A，Shade B，Shade C，Shade D，Blue 1，Blue 2，White，White-c Brown，Terracotta，Black，Orange 1，Orange 2，Mauve，Yellow，Pink-R ，Glaze-F

Liquid ：Coloring Liquid 1，Coloring Liquid 2

3D paste：3DN ，3DV

Accessory products ：2D Brush，3D Brush，16 shade matcher