NK Optik Otoflash G171-6 Curing Unit with Nitrogen Port
Flash-curing device for rapid and reliable curing of light-curable resins.
The Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications. Two photoflash lamps at the bottom of the curing chamber operate in a work mode with a frequency of 10 flashes per second. The photo-flash lamps produce a very intensive light radiation in a spectrum from 300 up to 700 nm. Because of this intensive light radiation, a better hardening of the materials is possible, resulting in materials with good physical values and reduced content of residual monomer versus using other lamp types with a different light emitting spectrum.
The G171-6 Otoflash includes protective gas appliance (N2). This prevents any oxygen inhibition on the surfaces so that they're cured completely non-stick without any need to remove or wipe away the inhibition layer.
Product Specs:
Dimensions of Polymerisation Chamber: approx. 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 W
Rated Voltage: 100, 117, 230 volt AC, adjustable by switch
*Make sure to check voltage switch setting in the back before connecting to power. We are not responsible for any short circuiting/electrical issues
Rated Frequency: 50 / 60 Hz
Power Input: 250 W
Spectral Distribution: 280-700 nm, maximum between 400 and 500 nm
Average Flash Power: 200 W
Flash Frequency: 10 flashes per second
Digital Timer: Adjustable from 1 to 9,999 flashes
Dimensions: 12" x 12" x 6"
Weight: approx. 17 lbs
Flash-curing device for rapid and reliable curing of light-curable resins.
The Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications. Two photoflash lamps at the bottom of the curing chamber operate in a work mode with a frequency of 10 flashes per second. The photo-flash lamps produce a very intensive light radiation in a spectrum from 300 up to 700 nm. Because of this intensive light radiation, a better hardening of the materials is possible, resulting in materials with good physical values and reduced content of residual monomer versus using other lamp types with a different light emitting spectrum.
The G171-6 Otoflash includes protective gas appliance (N2). This prevents any oxygen inhibition on the surfaces so that they're cured completely non-stick without any need to remove or wipe away the inhibition layer.
Product Specs:
Dimensions of Polymerisation Chamber: approx. 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 W
Rated Voltage: 100, 117, 230 volt AC, adjustable by switch
*Make sure to check voltage switch setting in the back before connecting to power. We are not responsible for any short circuiting/electrical issues
Rated Frequency: 50 / 60 Hz
Power Input: 250 W
Spectral Distribution: 280-700 nm, maximum between 400 and 500 nm
Average Flash Power: 200 W
Flash Frequency: 10 flashes per second
Digital Timer: Adjustable from 1 to 9,999 flashes
Dimensions: 12" x 12" x 6"
Weight: approx. 17 lbs
Flash-curing device for rapid and reliable curing of light-curable resins.
The Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications. Two photoflash lamps at the bottom of the curing chamber operate in a work mode with a frequency of 10 flashes per second. The photo-flash lamps produce a very intensive light radiation in a spectrum from 300 up to 700 nm. Because of this intensive light radiation, a better hardening of the materials is possible, resulting in materials with good physical values and reduced content of residual monomer versus using other lamp types with a different light emitting spectrum.
The G171-6 Otoflash includes protective gas appliance (N2). This prevents any oxygen inhibition on the surfaces so that they're cured completely non-stick without any need to remove or wipe away the inhibition layer.
Product Specs:
Dimensions of Polymerisation Chamber: approx. 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 W
Rated Voltage: 100, 117, 230 volt AC, adjustable by switch
*Make sure to check voltage switch setting in the back before connecting to power. We are not responsible for any short circuiting/electrical issues
Rated Frequency: 50 / 60 Hz
Power Input: 250 W
Spectral Distribution: 280-700 nm, maximum between 400 and 500 nm
Average Flash Power: 200 W
Flash Frequency: 10 flashes per second
Digital Timer: Adjustable from 1 to 9,999 flashes
Dimensions: 12" x 12" x 6"
Weight: approx. 17 lbs